Tuesday, 27 January 2015

USING THE BOOM AND CLAPPERBOARD

In today's session, we covered how to use a boom pole correctly and also learnt the importance of using a clapperboard at the beginning of a take. We were also introduced to a new camera which we would then be able to take to Liverpool and so also learnt the basics of working this camera, the Canon XF 305. 
Canon XF 305

One of the key things to remember when using the boom pole is to keeping the microphone steady so as not to interfere with the audio and keep it as clear as possible. There are a range of techniques with which to hold the boom including above the point of sound and below it. 

Example of holding the boom effectively
The other issue to consider when booming is to make sure the boom doesn't move into the shot, the common way to tackle this is to work with the cameraman and check the point in which the boom comes into shot and focus your eyeline on the point just before it comes into shot so as to keep it above the frame.


When using the Audio Technica, it is important to understand the levels as misalignment of these can result in the audio either becoming muffled and faint or the opposite,becoming to loud. When recording into the camera it is important to remember which channel you are recording into and adjust the levels accordingly.
Channel switches on the XF 305

The other topic we covered was how to effectively use the clapperboard. The use of this equipment is in order to sync both sound and picture, the method being that the clap itself will create a spike in the waveform during the editing process, therefore making it easier to align during the edit. 








No comments:

Post a Comment